John Deere Construction | Skid SteersRequest a Quote
- Rated Operating Capacity: 799 kg (1,760 lb.)
- Gross Horsepower: 37.8 kW (51 hp)
- Net Horsepower: 35.8 kW (48 hp)
- Operating Weight: 2,788 kg (6,140 lb.)
The vertical-lift boom offers more lift height and reach at the top of the lift path, for more stability and truck-loading ability.
Final Tier 4 (FT4)/EU Stage IV diesel engine packs plenty of power and torque.
Large coolers increase heat rejection for uninterrupted performance in severe, high-load conditions. Engine-mounted, belt-driven cooling fan delivers efficient, reliable performance.
With a weight of 6,140 pounds and convenient front and rear tie-downs, this skid steer is easy to trailer behind a pickup truck.
Without a bucket, the 314G slims down to 1600 mm (62.9 in.) to fit through narrow openings.
Easy-to-read LCD monitor provides a wealth of info and control, including vital operating conditions and advanced diagnostics.
Low-effort foot pedals are standard on all skid steers.
Optional rearview camera allows operators to see the jobsite behind the machine.
Swing-out rear door enables easy, ground-level access to daily service checkpoints and cooling system components.
Hinged rear door and hydraulic cooler swing open, making trash removal and core cleanout simple.
Spin-on engine oil and fuel filers mounted remotely behind the rear door allow quick changes.
Specs & Compare
Specs & Compare
|Select up to 4 models to compare specifications||
|Emission Rating||Tier 4 / Stage IV|
|Displacement, ltr (Inches³)||2.1 (128)|
|Rated Engine Speed, rpm||2600|
|SAE Net Power, kW (hp)||35.8 (48)|
|SAE Gross Power, kW (hp)||37.8 (51)|
|Max. Gross Torque, Nm (lbf / ft)||168 (124)|
|Drive Chain Rating [ANSI]||80 - HD|
|Tire size - Standard||10 x 16.5|
|Length - No Bucket, mm (inches)||2630 (103)|
|Length - With Bucket Foundry, mm (inches)||3240 (127.6)|
|Width - No Bucket, mm (inches)||1600 (62.9)|
|Overall Height, mm (inches)||1960 (77.2)|
|Ground Clearance, mm (inches)||180 (7)|
|Wheelbase, mm (inches)||1050 (41.5)|
|Rear Departure Angle, Degrees||22.3|
|Height to Hinge Pin, mm (inches)||3050 (120)|
|Dump Angle, Degrees||42|
|Dump Height - Maximum Foundry, mm (inches)||2400 (94.3)|
|Reach - Max Dump Height Foundry, mm (inches)||860 (34)|
|Rollback - Ground Level, Degrees||30|
|Fuel Tank, ltr (gallons (US))||71 (19)|
|Rated Operating Capacity - Optional Counterweight Foundry, kg (lbs)||863 (1900)|
|Rated Operating Capacity - Foundry, kg (lbs)||799 (1760)|
|Tipping Load - Foundry, kg (lbs)||1598 (3520)|
|Axle Torque - Maximum, Nm (lbf / ft)||4664 (3440)|
|Speed - Maximum, kph (mph)||10.8 (6.7)|
|Breakout - Lift Foundry, kN (lbf)||20 (4500)|
|Breakout - Bucket Foundry, kN (lbf)||22.2 (5000)|
|Hydraulic Power, kW (hp)||23.295 (31.2)|
|Pump Output, lt/min (gallons (US) / min)||63 (17)|
|System Pressure, bar (PSI)||224.08 (3250)|
|Operating Weight - Foundry, kg (lbs)||2788 (6140)|