John Deere Construction | Backhoes
- Net Peak Power: 75 kW (100 hp) at 1,600 rpm
- Max. Standard Dipperstick Digging Depth: 4.30 m (14 ft. 1 in.)
- Operating Weight: 6 654 kg (14,669 lb.)
Ride control operation is a feature to improve machine ride and reduce tire flexing when traveling over rough terrain at a high speed with loaded bucket, or when transporting with an empty bucket.
- Increases operator comfort and efficiency
- Reduces material spillage in load and carry operations
Standard economy mode can be configured separately between loader and backhoe functions. Activate economy mode for backhoe functions while retaining full power for loader functions. This helps maximize fuel usage in lighter-work applications with minimal effect on machine performance.
- Quick and easy fuel savings are available at the push of a button
- Economy mode SSM push button activation for reduced fuel consumption on 310SL through 710L models. For models 310L EP and 310L, Eco Mode is controlled through the display’s menu.
The loader control valve has been redesigned. The new valve will help reduce hydraulic cylinder-rod drift, improve metering profiles and controllability, and boost three-point stance performance. The auxiliary flow has been increased by 5 gpm (19 L/min) for improved performance on high flow loader attachments.
- Updated to reduce hydraulic cylinder-rod drift and improve metering profiles and controllability
- Integrated, low-leak, check valves in loader boom and bucket rod circuits on 310SLthrough 710L models, improving three-point stance performance
- Electrohydraulic (EH) auxiliary hydraulics are now integrated into the valve body, for minimized connections and potential leak points.
- Maximum auxiliary flow has increased to 35 gpm (133 L/min), for improved performance of high-flow loader attachments.
- Reduced spool to bore leakage
- Anti-cavitation standard on boom and bucket to further help with back dragging applications
- Anti-spill Linkage
- Low knee profile
- Pin retained
The loader lift arm is a fabricated design. The loader lift arm has a low knee profile for improved visibility. The guide link to lift arm pin is retained to prevent rotation for reduced wear and increased pin life.
The anti-spill function on base model L-Series Backhoes is mechanically activated. The anti-spill linkage runs down the right side of the loader lift arm and is set from the factory. Based on operator preference or over time, this linkage may require adjustment. Comments like an operator is ‘fighting’ the loader lever wanting more or less bucket rollback when raising the boom typically indicates the anti-spill linkage needs adjustment.
Enhanced “palm-on-top” loader-control grip is comfortable and easy to use. The loader-control valve has been redesigned to reduce resistance and improve its throw and feel.
- Lever travel from handle-to-linkage ratio has been reduced up to 15 percent.
- Update includes removal of the spherical joint and replacement with a forged U-joint and integrated needle bearings, for maximized durability.
- Maintains same loader grip and harness as previous L-Series Backhoes.
The John Deere PowerTech™ EWL eliminates the need for a diesel particulate filter (DPF) and exhaust gas recirculation (EGR) system. Underground customers will appreciate the increased power, improved torque, and greater reliability compared to the previous design.
- EPA Final Tier 4 (FT4)/EU Stage IV emission certified.
- 3–7 percent net horsepower increase with improved torque curve.
- Removal of the exhaust gas recirculation (EGR) system and components (plumbing, cooler, and sensors). Simpler two-valve cylinder-head design.
- Redesigned and improved fuel-filter location enables easy access when changing filters.
- Does not require a DPF, reducing maintenance costs on the aftertreatment system
- DOC Canister
- DEF Dosing Module
- SCR Canister
The 310L-410L model will now feature the Gen 2 EWL after treatment system (ATS).
- DEF fluid is injected directly into the DOC canister
- No decomp/mixer tube for DEF fluid injection.
Check and change fluids quickly and cleanly from the ground to keep equipment running smoothly. Separating coolers is quick and easy. Worry less about contaminants and moisture entering the axle case and shortening the life of your oil and axle components.
- Same side, ground level daily service – including fuel fill; easy checks are more likely to get done, preventing a major failure, and reducing inspection time
- Two position easy tilt hood
- Hinged Cooling Package Design
- Fully sealed front and rear axles
The one-piece SLX engine hood is constructed of a durable, paint-less plastic hood process. The hood retains the 2-position functionality for easy daily service checks and outstanding accessibility to the engine and cooling package with the loader boom raised and locked in position.
- Angled and sloped hood provides improved visibility to front loader and forks
- Integrates color into the molding process, eliminating the need for exterior paint
- Reduces visible surface scratches
- Improves hood alignment with mounting saddle and latching
- Minimizes flexing with reinforcement at the pivot and sides
Specs & Compare
|Specs & Compare|
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech EWL 4045HL050|
|Displacement, ltr (Inches³)||4.5 (276)|
|Rated Speed, rpm||1600|
|Engine Output - Net, kW (hp)||75 (100)|
|Transmission Type||Power Shift|
|Service Brake Type||Wet Disc|
|Service Brake Actuation||Hydraulic w/Power Assist|
|Max length with std. Stick, mm (ft/in)||7240 (23 ft 9 in)|
|Height over std Stick, mm (ft/in)||3390 (11 ft 1 in)|
|Height over ext Stick, mm (ft/in)||3390 (11 ft 1 in)|
|Maximum Width, mm (ft/in)||2200 (7 ft 3 in)|
|Width over tires, mm (ft/in)||2200 (7 ft 3 in)|
|Wheelbase - 4WD, mm (ft/in)||2190 (7 ft 2 in)|
|Ground Clearance, mm (inches)||293 (12)|
|Width - General Purpose Bucket, mm (ft/in)||2184 (7 ft 2 in)|
|Bucket Rotation - Position 1, Degrees||190|
|Bucket Pin Height - General Purpose, mm (ft/in)||3480 (11 ft 5 in)|
|Dump Height - General Purpose, mm (ft/in)||2740 (9 ft )|
|Dump Reach - General Purpose, mm (inches)||702 (27.7)|
|Digging Depth - General Purpose, mm (inches)||70 (2.8)|
|Fuel Tank, ltr (gallons (US))||128.7 (34)|
|Hydraulic Tank, ltr (gallons (US))||45 (11.9)|
|Bucket Capacity - Standard General Purpose, m³ (yd³)||0.77 (1)|
|Bucket Tearout - Non-Extending Dipper, kN (lbf)||48.2 (10844)|
|Stick tearout, kN (lbf)||31.1 (6992)|
|Boom Lift - Maximum Reach - Non-Extending Dipper, kg (lbs)||1347 (2970)|
|Bucket Breakout - General Purpose, kN (lbf)||41.6 (9361)|
|Lift To Full Height - General Purpose Bucket, kg (lbs)||2919 (6435)|
|Pump Flow, lt/min (gallons (US) / min)||106 (28)|
|Operating Weight, kg (lbs)||6822 (15039)|