John Deere Construction | Motor GradersRequest a Quote
- Net Power: 209 kW (280 hp)
- Operating Weight: 20 715 kg (45 668 lb)
- Blade Pull: 15 501 kg (34,173 lb.)
- Net Torque Rise: 53%
Expand All Collapse All
- John Deere SmartGrade Motor Graders are fully integrated and calibrated from the factory, arriving at your jobsite ready to work.
- Integration into the SmartGrade cabin and structures helps shield key grade-control components such as wire harnesses and sensors from damage and theft.
- Eight arm-rest mounted, fingertip-actuated controls, including lever steer, are arranged in the industry-standard pattern on each side of the standard steering wheel.
- Optional dual-joystick controls on GP models require significantly less wrist motion to articulate the motor grader than competitive joystick controls.
- The EPA FT4/EU Stage IV engine
- Auto shutdown turns off the engine after an operator-determined period of time. Saves fuel and reduces wear on engine, transmission, and hydraulic components.
- Optional Premium Circle: The industry-leading design features a fully sealed bearing and pinion, reducing operating costs while delivering 40-percent more torque and 15-percent more speed than a traditional circle.
- Increased engine horsepower, torque, and blade pull produce generous power and lugging ability, to deliver more power to the ground, easily pull through tough spots, or tackle steep hills.
- Horsepower and torque are optimized for each gear to maximize performance no matter your application.
- All around visibility is virtually unobstructed with a clear view to the heel and toe, and behind the moldboard.
Specs & Compare
|Specs & Compare|
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PSS 9.0L|
|Number Of Cylinders||6|
|Displacement, ltr (Inches³)||9 (549)|
|Engine Output - Net, kW (hp)||209 (280)|
|Peak Engine Torque, Nm (lbf / ft)||1430 (1066)|
|Torque Rise, %||53|
|Net Power - Gear 1, kW (hp)||168 (225)|
|Net Power - Gear 2, kW (hp)||175 (235)|
|Net Power - Gear 3, kW (hp)||187 (250)|
|Net Power - Gear 4, kW (hp)||190 (255)|
|Net Power - Gear 5, kW (hp)||198 (265)|
|Net Power - Gear 6, kW (hp)||201 (270)|
|Net Power - Gear 7, kW (hp)||205 (275)|
|Net Power - Gear 8, kW (hp)||209 (280)|
|Transmission Manufacturer||John Deere|
|Number Of Speeds - Forward||8|
|Number Of Speeds - Reverse||8|
|Front Wheel Drive||No|
|Axle Oscillation, ± Degrees||32|
|Front Wheel Lean, ± Degrees||20|
|Service Brake Type||Multiple Wet Discs|
|Service Brake Actuation||Hydraulic|
|Overall Length, mm (ft/in)||8890 (29 ft 2 in)|
|Height Over ROPS, mm (ft/in)||3180 (10 ft 5 in)|
|Transport Width, mm (inches)||2490 (98)|
|Wheelbase, mm (ft/in)||6160 (20 ft 3 in)|
|Bladebase, mm (ft/in)||2530 (8 ft 4 in)|
|Moldboard Sideshift - Right, mm (inches)||683 (26.9)|
|Moldboard Sideshift - Left, mm (inches)||683 (26.9)|
|Shoulder Reach - Right, mm (ft/in)||2329 (7 ft 7 in)|
|Shoulder Reach - Left, mm (ft/in)||2329 (7 ft 7 in)|
|Circle Rotation, Degrees||360|
|Turning Radius - Minimum, m (ft/in)||7.21 (23 ft 8 in)|
|Frame Articulation, ± Degrees||22|
|Operating Weight, kg (lbs)||17046 (37580)|
|Weight With Push Block & Ripper, kg (lbs)||20715 (45668)|
|Operating Weight - Maximum, kg (lbs)||24948 (55000)|