John Deere Construction | Dozers
- Net Power: 60 kW (80 hp) at 2,200 rpm
- Operating Weight: 7 959–8 522 kg (17,510–18,752 lb.)
- Track on Ground: 2 184 mm (86 in.)
EPA Final Tier 4 (FT4)/EU Stage IV diesel meets emission regulations without loss of power or torque. Four-valve head delivers increased intake-air and exhaust-gas flow for each wet-sleeve cylinder, for long-lasting performance.
Standard Eco mode maximizes fuel usage by up to 20 percent compared to conventional torque-converter transmissions, automatically adjusting engine rpm and powertrain settings based on load, without loss of performance.
When you order your dozer with electrohydraulic (EH) controls, it’s grade-control ready, giving you the ability to add the grade-control system of your choice. Optional Slope Control provides in-depth factory integration and is supported by your John Deere dealer.
Optional Slope Control system provides simple-to-use grade control that allows operators to set a desired slope and hold grade through changes in existing terrain. It helps both new and veteran operators hold grade with less effort and without needing an external elevation reference.
Cab-forward design allows a commanding view behind, below, and beyond the blade. Side and rear visibility from inside the cab is open to the surrounding jobsite.
Sealed-switch module (SSM) allows low-effort control of keyless start and enables exclusive features such as turbocharger cool-down, auto shutdown, and Eco mode.
Total Machine Control enables an operator to customize control of decelerator mode and response, forward/reverse ground speed, steering modulation, and forward/reverse speed ratios, and even record machine usage.
Available quick fluid-evacuation system helps speed servicing. 500-hour engine oil and 2,000-hour transmission and hydraulic fluid intervals decrease maintenance downtime and expense.
Infinitely variable range to 9.7 km/h (6.0 mph) allows total flexibility to match ground speed to the load.
Counter-rotation boosts productivity by enabling an operator to overcome heavy corner loads and quickly reposition the blade on the go. Provides space-saving spot turns, too.
Specs & Compare
|Specs & Compare|
|Select up to 4 models to compare specifications||
|Engine Manufacturer||John Deere|
|Engine Model||PowerTech PWS 4045|
|Displacement, ltr (Inches³)||4.5 (276)|
|Rated Speed, rpm||2200|
|Engine Output - Net, kW (hp)||60 (80)|
|Speeds Mode 1 - Forward||1|
|Speeds Mode 1 - Reverse||1|
|Final Drive||Triple Reduction - Planetary|
|Shoe - Pitch, mm (inches)||160 (6.3)|
|Shoe - Type||Single Grouser - Moderate Service|
|Ground Contact Area, cm² (Inches²)||17755 (2752)|
|Number Of Shoes||40|
|Height - Max, mm (ft/in)||2799 (9 ft 2 in)|
|Ground Clearance, mm (inches)||329 (13)|
|Track Length - On Ground, mm (ft/in)||2184 (7 ft 2 in)|
|Length - PAT Blade Straight, mm (ft/in)||4016 (13 ft 2 in)|
|Track Gauge, mm (ft/in)||1448 (4 ft 9 in)|
|Blade - Width, mm (ft/in)||2464 (8 ft 1 in)|
|Blade - Dig Depth, mm (inches)||528 (20.8)|
|Blade - Tilt, mm (ft/in)||338 (1 ft 1 in)|
|Steering - Differential||No|
|Fuel Tank, ltr (gallons (US))||202 (53.45)|
|Hydraulic Tank, ltr (gallons (US))||100 (26.42)|
|Blade - Capacity, m³ (yd³)||1.6 (2.1)|
|Speed - Forward Maximum, kph (mph)||8 (5)|
|Speed - Reverse Maximum, kph (mph)||8 (5)|
|Ground Bearing Pressure, kPa (PSI)||43.9 (6.4)|
|Implement Pump - Type||Gear|
|Implement Pump - Flow, lt/min (gallons (US) / min)||80 (21)|
|Implement Pump - Pressure, bar (PSI)||206.84 (3000)|
|Operating Weight, kg (lbs)||7959 (17510)|